TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 628 of 930
TM 9-2320-366-10-2 3-5. CHANGING TIRE (CONT) WARNING Notify Unit Maintenance that lugnuts must be tightened to 425-475 lb-ft (576-644 N m) as soon as possible. Tire may come loose if lugnuts are not tightened to proper torque. Failure to comply may result in serious injury or death to personnel. NOTE • Studs and lugnuts on left side of vehicle have left-hand threads. Turn lugnuts to right to loosen, and to left to tighten. • Studs and lugnuts on right side of vehicle have right-hand threads. Turn lugnuts to left to loosen, and to right to tighten. (5) Install ten lugnuts (8) on studs (7) in sequence shown. (6) Lower vehicle to ground with hydraulic jack (9). (7) Remove hydraulic jack (9), handle (10) and jack adapter (10.1) from vehicle. 3-96 Change 1