TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 604 of 930
TM 9-2320-366-10-2 3-84.18 Change 2 Table 3-2. Troubleshooting (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION w. WRECKER HYDRAULIC SYSTEM (CONT) w10. M1089 MATERIAL HANDLING CRANE (MHC) HAND PUMP DOES NOT WORK (CONT). (a) If hydraulic oil view gage registers below black line, remove reservoir cap and fill hydraulic oil to appropriate level (Appendix F). (b) Install reservoir cap. Step 2. Check hydraulic lines and fittings for class III leaks. If class III leaks are found or wrecker MHC hand pump still does not work, notify Unit Maintenance. w11. NO SERVICE HYDRAULIC POWER FROM M1089. Notify Unit Maintenance. w12. M1089 MATERIAL HANDLING CRANE (MHC) LEFT OR RIGHT OUTRIGGER (JACK) DRIFTS OR DOES NOT WORK. Notify Unit Maintenance. w13. M1089 MATERIAL HANDLING CRANE (MHC) MAST DOES NOT ERECT OR STOW. Notify Unit Maintenance. w14. M1089 MATERIAL HANDLING CRANE (MHC) OUTRIGGER EXTENSION CYLINDER DOES NOT WORK. Notify Unit Maintenance. w15. M1089 MATERIAL HANDLING CRANE (MHC) BOOM SWING DRIVE ASSEMBLY DOES NOT WORK. Notify Unit Maintenance. w16. M1089 MATERIAL HANDLING CRANE (MHC) BOOM DOES NOT LIFT UP OR DOWN. Notify Unit Maintenance. w17. M1089 MATERIAL HANDLING CRANE (MHC) BOOM DOES NOT TELESCOPE IN OR OUT. Notify Unit Maintenance. w18. M1089 MATERIAL HANDLING CRANE (MHC) HOIST DOES NOT WORK. Notify Unit Maintenance. w19. M1089 LEFT STIFFLEG DRIFTS OR DOES NOT WORK. Notify Unit Maintenance. w20. M1089 RIGHT STIFFLEG DRIFTS OR DOES NOT WORK. Notify Unit Maintenance.