TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 598 of 930
TM 9-2320-366-10-2 Table 3-2. Troubleshooting (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION s. 15K SELF-RECOVERY WINCH (SRW) (CONT) s1. 15K SELF-RECOVERY WINCH (SRW) DOES NOT WORK (CONT). CAUTION Hydraulic oil level must not be above, or more than 0.75 in. (1.9 cm) below black line on hydraulic oil view gage. Failure to comply may result in damage to equipment. NOTE Perform step 2 on M1089. Step 2. Check hydraulic oil level at hydraulic oil view gage. (a) If hydraulic oil view gage registers below black line, remove reservoir cap and fill hydraulic oil to appropriate level (Appendix F). (b) Install reservoir cap. Step 3. Check hydraulic lines and fittings for class III leaks. If class III leaks are found or 15K SRW still does not work, notify Unit Maintenance. t. STEERING HYDRAULIC SYSTEM t1. STEERING HARD OR DOES NOT WORK. Step 1. Raise cab (para 2-28a). 3-84.12 Change 1