Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download

Page 593 of 930

TM 9-2320-366-10-2 Table 3-2. Troubleshooting (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION m6. NO OVERSPEED WARNING LIGHT AND/OR OVERSPEED PRESSURE CHANGE. Notify Unit Maintenance. n. AXLE n1. AXLE DIFFERENTIAL(S) NOISY. Notify Unit Maintenance. p. STEERING SYSTEM p1. HARD TO STEER. Step 1. Check tire pressures with tire gage for each CTIS setting. Notify Unit Maintenance if tire pressures do not match those given below: ALL MODELS EXCEPT M1088 AND M1089 MODELS M1088 AND M1089 HWY Mode 60 psi (414 kPa) HWY Mode 81 psi (558 kPa) X-C Mode 37 psi (255 kPa) X-C Mode 54 psi (372 kPa) SAND Mode 22 psi (152 kPa) SAND Mode 32 psi (221 kPa) EMER Mode 16 psi (110 kPa) EMER Mode 24 psi (165 kPa) Step 2. Raise cab (para 2-28a). CAUTION Do not overfill power steering reservoir. Failure to comply may result in damage to equipment. Step 3. Check that steering reservoir is filled to proper level. Oil should be level with full mark on dipstick. (a) Add oil as required. Change 1 3-84.7