TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 592 of 930
TM 9-2320-366-10-2 Table 3-2. Troubleshooting (Cont) MALFUNCTION TEST OR INSPECTION CORRECTIVE ACTION l. HYDRAULIC SYSTEM (CONT) l2. LOSS OF HYDRAULIC PRESSURE (THREE STAGE PUMP). CAUTION Hydraulic oil level must not be above, or more than 0.75 in. (1.9 cm) below black line on hydraulic oil view gage. Failure to comply may cause damage to hydraulic system. Check hydraulic oil level at hydraulic oil view gage. (a) If hydraulic oil view gage registers below black line, remove reservoir cap and fill hydraulic oil to appropriate level (Appendix F). (b) Install reservoir cap. (c) If loss of hydraulic pressure continues, notify Unit Maintenance. m. CENTRAL TIRE INFLATION SYSTEM (CTIS) m1. TWO STEADY MODE LIGHTS ILLUMINATE ON CENTRAL TIRE INFLATION SYSTEM (CTIS) ECU. Notify Unit Maintenance. m2. FOUR CENTRAL TIRE INFLATION SYSTEM (CTIS) ECU INDICATOR LIGHTS FLASHING. Notify Unit Maintenance. m3. FIVE CENTRAL TIRE INFLATION SYSTEM (CTIS) ECU INDICATOR LIGHTS FLASHING. Notify Unit Maintenance. m4. CENTRAL TIRE INFLATION SYSTEM (CTIS) REPEATEDLY RESUMES CYCLING 30 SECONDS AFTER INDICATOR LIGHTS STOP FLASHING. Notify Unit Maintenance. m5. CENTRAL TIRE INFLATION SYSTEM (CTIS) ECU INDICATES NO FAULT CODE BUT SYSTEM FAILS TO INFLATE OR DEFLATE. Notify Unit Maintenance. 3-84.6 Change 1