TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 478 of 930
TM 9-2320-366-10-2 2-77. SNATCH BLOCK INSTALLATION/REMOVAL a. Install Snatch Block on 30K Winch Cable. (1) Remove snatch block (1) from tool box. (2) Remove clevis pin (2) from screw (3). (3) Loosen screw (3) in snatch block (1). (4) Move plate (4) to side to open snatch block (1). (5) Place cable (5) in snatch block (1). (6) Close plate (4) and align holes. (7) Tighten screw (3) in snatch block (1). (8) Install clevis pin (2) in screw (3). CAUTION Do not exceed a 30-ton (27 metric tons) pull on snatch block. Failure to comply may result in damage to equipment. (9) Attach snatch block (1) to mired vehicle (FM 20-22). (10) Continue with 30K Winch Operation (para 2-42a). 2-882 Change 1