TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download

Page 464 of 930

TM 9-2320-366-10-2 2-74. AMBER WARNING LIGHT KIT INSTALLATION/REMOVAL (CONT) CAUTION Ensure cable has enough slack after inner tube is raised to prevent cable from rubbing against mast. Failure to comply may result in damage to equipment. (6) Lift up on handle (7) to raise inner tube (6) to full up position. (7) Install pin (2) in mast (3). (8) Install clevis pin (1) in pin (2). (9) Install pin (5) in handle (7). (10) Install clevis pin (4) in pin (5). f. Lower Mast (from Mid-Position) (M1089 Only). NOTE Left and right side masts are lowered the same way. Right side shown. (1) Remove clevis pin (1) and pin (2) from mast (3). 2-870