TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 462 of 930
TM 9-2320-366-10-2 2-74. AMBER WARNING LIGHT KIT INSTALLATION/REMOVAL (CONT) d. Raise Mast (to Mid-Position) (M1089). NOTE Left and right side masts are raised the same way. Right side shown. (1) Remove clevis pin (1) and pin (2) from mast (3). CAUTION Ensure cable has enough slack after inner tube is raised to prevent cable from rubbing against mast. Failure to comply may result in damage to equipment. (2) Lift up on handle (4) to raise inner tube (5) to mid-position. (3) Install pin (2) in mast (3). (4) Install clevis pin (1) in pin (2). 2-868