TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 435 of 930
TM 9-2320-366-10-2 Change 2 2-815 g. Cab Air Spring Inflation. After vehicle is removed from aircraft, both cab air springs must be unpinned and inflated before vehicle is operated. Failure to comply may result in damage to equipment. (1) Remove quick release pin (1) from air spring (2). (2) Install quick release pin (1) in air spring bracket (3). NOTE Left and right side cab air springs are inflated the same way. Right side cab air spring shown. (3) Perform steps (1) and (2) on left side of vehicle. (4) Press and turn CAB knob (4) to the right. CAUTION