TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 433 of 930
TM 9-2320-366-10-2 (7) Turn SUSPENSION knob (1) to the RAISE position. NOTE Use back-up hydraulic pump (para 2-52) if pressing PUMP knob does not accomplish step (8). (8) Press and hold PUMP knob (3) until vehicle returns to normal height and suspension compression plate (6) is loose. (9) Remove pin (7) from axle stud (8). WARNING Both suspension compression plates must be installed on axle studs. Failure to comply may result in serious injury or death to personnel. NOTE Left and right side suspension compression plates are removed the same way. Right side suspension compression plate shown. (10) Remove suspension compression plate (6) from axle stud (8). (11) Turn SUSPENSION knob (1) to the LOWER position. 2-813