TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 400 of 930
TM 9-2320-366-10-2 2-65. 15K SELF-RECOVERY WINCH (SRW) OPERATION (CONT) (6) Position PTO switch (3) to on. CAUTION Keep tachometer within 1,250-1,450 rpm when Power Take-Off (PTO) is engaged. Failure to comply may result in damage to equipment. NOTE In the event of a tachometer failure a HAND THROTTLE lever positioned to L is approximately 1,250-1,450 rpm. (7) Set engine speed to 1,250-1,450 rpm or place HAND THROTTLE lever (4) to L. (8) Position winch switch (5) to on. (9) Hold WINCH IN/OUT switch (6) in the WINCH IN position until vehicle is recovered. (10) Release WINCH IN/OUT switch (6). (11) Pull out SYSTEM PARK control (7). 2-774