TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 380 of 930
TM 9-2320-366-10-2 2-750 Change 2 2-62. TOWING DISABLED VEHICLE (CONT) b. Preparation of Disabled Vehicle (M1078/M1083 Series). (1) Notify Unit Maintenance to remove drive shafts as required. (1.1) Press N (Neutral) button (1) on WTEC II TEPSS (2) or WTEC III TPSS (2). CAUTION • Both drive shafts connected to the transmission transfer case must be removed if disabled M1078 or M1083 series vehicle is flat towed over 100 miles (161 Km) or towing speed is over 35 MPH. Failure to comply may result in damage to towed vehicle. • Front axle drive shaft must be removed prior to performing a rear connection lift and tow. Failure to comply may result in damage to equipment. • Intermediate axle drive shaft must be removed on M1083 series vehicles prior to performing a front connection lift and tow. Failure to comply may result in damage to equipment. • Rear axle drive shaft must be removed on M1078 series vehicles prior to performing a front connection lift and tow. Failure to comply may result in damage to equipment. NOTE Disabled vehicles must be prepared and moved in accordance with FM