TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 289 of 930
TM 9-2320-366-10-2 b. Prepare MHC for Use. WARNING • Do not operate Material Handling Crane (MHC) unless outriggers are set up and MHC is level from side to side. Failure to comply may result in serious injury or death to personnel. • Set up stifflegs if load is swung around rear of vehicle. Vehicle could turn over if not supported. Failure to comply may result in serious injury or death to personnel. • Operator must keep load in sight at all times while operating Material Handling Crane (MHC). Load may unexpectedly shift. Failure to comply may result in serious injury or death to personnel. • Do not operate Material Handling Crane (MHC) and 15K Self- Recovery Winch (SRW) at the same time. Failure to comply may result in serious injury or death to personnel. CAUTION Hydraulic oil level must be at FULL line and hydraulic shutoff and return valves must be opened before Material Handling Crane (MHC) is operated. Failure to comply may result in damage to equipment. NOTE MHC will not operate if hydraulic or electrical systems fail. Refer to para 2-50a and Table 2-22 to verify that MHC settings are correct for load being lifted. Refer to para 2-67c if hydraulic or electrical systems fail. NOTE MHC can operate on side slope up to 5 degrees. (1) Start engine (para 2-27a or b). (2) Position vehicle on level ground so all loading and unloading can be performed from one position. 2-665