TM-9-2320-366-10-2 MTV Operator Manual M1083 Series - Volume 2 Download
Page 109 of 930
TM 9-2320-366-10-2 (9) Remove two shackles from M998 tow eyes (TM 9-2320-280-10). WARNING Goggles must be worn while operating wrecker control panel. Blowing dust and debris may become airborne while engine is running. Failure to comply may result in injury to personnel. (10) Place UNDERLIFT lever (11) in UP position to raise crossbar (12) until two top bumper lift tools (1) are aligned with M998 tow eyes (13). (11) Place STINGER lever (14) in OUT position to extend stinger (15) until two top bumper lift tools (1) are aligned with M998 tow eyes (13). NOTE • Left and right side top bumper lift tools are installed on M998 tow eyes the same way. Left side shown. • Top bumper lift tools are attached to M998 tow eyes with bolts, nuts and cotter pins removed with M998 shackles. (12) Install two top bumper lift tools (1) on two M998 tow eyes (13) with two bolts (16), nuts (17), and cotter pins (18). 2-495