TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 603 of 802
TM 9-2320-366-10-1 Change 2 2-385 Cab protector is spring loaded and weighs approximately 180 lbs (82 kgs). Keep pressure on cab protector when lowering and when installing pins. Failure to comply may result in injury to personnel. NOTE Step (2) requires the aid of an assistant. (2) Lower cab protector (3) into dump bed (4). (3) Remove lynch pin (5) and hitch pin (6) from cab protector (3). (4) Install hitch pin (6) through cab protector (3) and dump body (4). (5) Install lynch pin (5) in hitch pin (6). (6) Install turn bolt (2) and lynch pin (1) in nut (7). WARNING