TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 592 of 802
TM 9-2320-366-10-1 2-37. M1084/M1086 MATERIAL HANDLING CRANE (MHC) OPERATION (CONT) h. Stow MHC. NOTE HOIST lever and TELESCOPE lever are operated at the same time. (1) Position HOIST lever (1) to UP to reel in cable (2) until approximately 2 ft (0.6 m) of cable hangs from boom (3). (2) Position TELESCOPE lever (4) to IN to retract boom (3) so that cable (2) and hook assembly (5) are on Operator’s side of vehicle. (3) Operate SWING lever (6) to align lock pin holes (7) in turntable bearing (8). (4) Install pin (9) in turntable bearing (8). (5) Operate BOOM lever (10) so that boom angle is approximately 45 degrees. (6) Position TELESCOPE lever (4) to IN to retract boom (3) completely. 2-374 Change 1