TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 589 of 802
TM 9-2320-366-10-1 g. Raise and Lower Load. WARNING • Area must be clear of personnel before operating swing or telescoping boom. Boom must be rotated and telescoped slowly enough so Operator has control of load. If Operator cannot see load during operation, operate Material Handling Crane (MHC) with REMOTE CONTROL UNIT. Failure to comply may result in serious injury or death to personnel or damage to equipment. • Attach guide lines to load to keep control of load at all times. Failure to comply may result in serious injury or death to personnel or damage to equipment. (1) Refer to range diagram (para 2-37a) or to Table 2-14 to determine correct boom angle. (2) Position BOOM lever (1) to UP until boom angle indicator (2) shows correct reading. 2-371