TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 581 of 802
TM 9-2320-366-10-1 d. Raise Boom to Operating Position. CAUTION When disconnecting hook assembly from stowage ring, do not allow excessive slack to build-up when paying out cable. Cable may get tangled on drum. Failure to comply may result in damage to equipment. (1) Position HOIST lever (1) to DOWN until there is enough slack in cable (2) to disconnect hook assembly (3) from stowage ring (4). (2) Remove safety pin (5) from hook assembly latch (6). (3) Disconnect hook assembly (3) from stowage ring (4). 2-363