TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 579 of 802
TM 9-2320-366-10-1 NOTE Both outrigger pads are installed on outriggers the same way. Right side shown. (2) Remove pin (5) from outrigger pad (2). (3) Clean all dirt and debris from outrigger pad (2) and from end of outrigger (6). (4) Place outrigger pad (2) on bottom of outrigger (6). (5) Install pin (5) in outrigger pad (2). WARNING Keep hands and feet clear of outriggers during operation. Failure to comply may result in injury to personnel. (6) Position LH O/R JACK lever (7) to DOWN until outrigger pad (2) is on ground. (7) Position RH O/R JACK lever (8) to DOWN until outrigger pad (2) is on ground. 2-361