TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 576 of 802
TM 9-2320-366-10-1 2-37. M1084/M1086 MATERIAL HANDLING CRANE (MHC) OPERATION (CONT) b. Prepare MHC for Use. WARNING • Operator must keep load in sight at all times while operating Material Handling Crane (MHC). Load may unexpectedly shift. Failure to comply may result in serious injury or death to personnel. • Do not operate Material Handling Crane (MHC) and 15K Self-Recovery Winch (SRW) at the same time. Failure to comply may result in serious injury or death to personnel. • Wheels must always be chocked before operating Material Handling Crane (MHC). Vehicle may move or load may shift. Failure to comply may result in serious injury to personnel or damage to equipment. • Goggles must be worn while operating Material Handling Crane (MHC) controls. Blowing dust and debris may become airborne while engine is running. Failure to comply may result in injury to personnel. NOTE MHC will not operate unless outriggers are lowered. (1) Start engine (para 2-27a or b). NOTE MHC can operate on a side slope of up to 5 degrees. (2) Position vehicle on level ground so all loading and unloading can be done from one position. (3) Chock wheels (para 2-27h). 2-358 Change 1