TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 435 of 802
TM 9-2320-366-10-1 Change 2 2-291 (5) Install two ladder plugs (6) in ladder mounting holes (7) with two pins (8). f. Stow Ladder (M1090/M1094). Do not press dump TAILGATE RELEASE switch while tailgate is not connected at the top. Tailgate will fall from dump body. Failure to comply may result in injury to personnel or damage to equipment. NOTE M1090/M1094 ladder may be used with tailgate up or down. With the tailgate up, the ladder may beinstalled on the LH or RH side, with the tailgate down theladder may be installed only on the RH side. Perform steps (1) through (4) to remove the ladder with the tailgate down. (1) Remove ladder (5) from mounting slots (20). WARNING