TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download

Page 377 of 802

TM 9-2320-366-10-1 f. Shut Down Engine. (1) Stop vehicle (para 2-27d). (2) Press N (Neutral) button (1) on WTEC II TEPSS (2) or WTEC III TPSS (2). (3) Pull out SYSTEM PARK control (3). CAUTION • Engine temperature must be maintained at a minimum of 165°F (74°C) for final 15 minutes prior to engine shutdown. Failure to comply may result in damage to engine. • When outside temperatures are below 32°F (0°C) do not continuously operate engine above 1,250 to 1,450 rpm or HAND THROTTLE lever above L. Failure to comply may result in damage to equipment. NOTE • Steps (4) through (6) are only necessary to meet 165°F (74°C) requirements. • Perform step (4) if it is necessary to increase WATER TEMP to 165°F (74°C) and it can be accomplished using accelerator pedal or HAND THROTTLE lever, within approximately 20 minutes. • In the event of a tachometer failure a HAND THROTTLE lever positioned to L is approximately 1,250 to 1,450 rpm. (4) Set engine speed to 1,250 to 1,450 rpm or place HAND THROTTLE lever (4) to L until WATER TEMP gage (5) reaches and maintains 165°F (74°C) for 15 minutes. 2-235