Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download

Page 279 of 802

TM 9-2320-366-10-1 Table 2-3. Preventive Maintenance Checks and Services (M1084 and M1086) (Cont) Location Item No. Interval Item to Check/ Service Crewmember Procedure Not Fully Mission Capable If: CAUTION Keep hook block at least 2 ft (0.6 m) from end of boom. If hook block hits end of boom, Material Handling Crane (MHC) will lose power for several seconds. Failure to comply may result in damage to equipment. 3 During MHC Remote Controls (Cont) h. Place TELESCOPE lever in OUT position and HOIST lever in DOWN position to extend boom. h. Boom does not extend or cable does not pay out. i. Place TELESCOPE lever to IN position and HOIST lever in UP position to retract boom. i. Boom does not retract or hoist does not reel in cable. j. Place BOOM lever in UP position to increase boom angle. j. Boom angle does not increase. Change 1 2-141