TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 270 of 802
TM 9-2320-366-10-1 Table 2-3. Preventive Maintenance Checks and Services (M1084 and M1086) (Cont) Location Item No. Interval Item to Check/ Service Crewmember Procedure Not Fully Mission Capable If: WARNING Keep hands and feet clear of outriggers during operation. Failure to comply may result in injury to personnel. NOTE Position outrigger pads as required so that ends of outriggers lower to outrigger pad sockets. 2 During MHC Operation a. Prepare MHC for use (para 2-37b). b. Set up outrigger pads (para 2-37c). c. Check that two pins are attached to each pad. d. Place LH and RH O/R JACK lever in down position until outrigger lowers to ground. c. Pin(s) are damaged or missing. d. Outrigger cylinder will not lower completely to ground. 2-132