TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 186 of 802
TM 9-2320-366-10-1 2-56 Change 2 Table 2-1. Preventive Maintenance Checks and Services (All Models) (Cont) Location Item No. Interval Item to Check/ Service Crewmember Procedure Not Fully Mission Capable If: 3 WARNING • Extreme care should be taken when removing coolant fill cap if temperature gage reads above 180°F (82°C). Contact with steam or hot coolant under pressure may result in injury to personnel. • Pressure in coolant reservoir must be released before removing cap. Failure to comply may result in injury to personnel. • Do not operate vehicle if radiator cap is damaged or missing. Failure to comply will result in injury to personnel or damage to equipment. 3 Before Coolant a. Check coolant level. Coolant level should be between upper sightglass and lower sightglass on radiator overflow tank with engine not running. Add coolant as required (Appendix F Note 4). a. Coolant level below lower sightglass. Before Coolant b. Check for oil in coolant. b. If engine oil is present, Notify Unit Main- tenance.