TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 158 of 802
TM 9-2320-366-10-1 2-9. M1084/M1086 MATERIAL HANDLING CRANE (MHC) CONTROLS AND INDICATORS (CONT) b. REMOTE CONTROL UNIT. Figure 2-20 shows all controls on REMOTE CONTROL UNIT. Figure 2-20. REMOTE CONTROL UNIT 1. REMOTE CONTROL UNIT Receptacle. Used to connect REMOTE CONTROL UNIT to MHC. 2. SWING Lever. Swings the boom to the right (CW) and to the right (CCW) when REMOTE CONTROL UNIT switch is positioned to ON. 3. TELESCOPE Lever. Extends and retracts the boom when REMOTE CONTROL UNIT switch is positioned to ON. 4. REMOTE CONTROL UNIT Switch. Two-position switch controls power to the REMOTE CONTROL UNIT. The POWER switches on both the MHC controls and REMOTE CONTROL UNIT must be positioned to ON before the REMOTE CONTROL UNIT will operate. 5. BOOM Lever. Raises and lowers the boom when REMOTE CONTROL UNIT switch is positioned to ON. 6. HOIST Lever. Pays out and reels in the cable when REMOTE CONTROL UNIT switch is positioned to ON. 2-28 Change 1