TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download

Page 121 of 802

TM 9-2320-366-10-1 Figure 1-26. Material Handling Crane (MHC) (Cont) b. Hydraulic System. The hydraulic reservoir (6) contains the oil needed to operate the MHC. The hydraulic reservoir (6) holds 27 gal (102 L) of oil and is equipped with an oil level gage (7). A fluid filter (8) is mounted on the reservoir to remove contaminants. Hydraulic pressure is supplied by a single stage hydraulic pump (9) mounted on the back of the PTO (10). Placing the PTO switch (11) in the on position causes the PTO drive gear to engage with the transmission and drive the single stage hydraulic pump. A manually operated hydraulic pump (12) allows you to lower any load to the ground and stow the MHC if the single stage hydraulic pump fails. 1-69