TM-9-2320-366-10-1 MTV Operator Manual M1083 Series - Volume 1 Download
Page 112 of 802
TM 9-2320-366-10-1 1-18. ELECTRICAL SYSTEM (CONT) Figure 1-23. Electrical System (Cont) (5) The ether start switch (9) is used to start the engine when the outside temperature is 32°F (0°C) or below. Pressing the ether start switch sends a measured charge of ether to the engine to make starting easier. (6) The amber warning light switch (10) operates the amber warning light on the cab roof when installed. (7) Positioning the hazard lights switch (11) to on causes both left and right turn signals to flash. (8) A dimmer switch (12) is provided so that you can adjust the brightness of the instrument panel lighting. (9) The main light switch (13) is the only switch that is active even when the master power switch is off. a. Positioning the main selector lever to SER DRIVE causes the headlights, taillights, marker lights, and clearance lights to illuminate; stoplights will illuminate when brake pedal is depressed. b. Positioning the main selector lever to STOP LIGHT extinguishes all vehicle lights but allows stoplights to illuminate when brake pedal is depressed. c. Positioning the auxiliary lever to PARK with the main selector lever in SER DRIVE causes the headlights to extinguish and the front parking lights to illuminate. 1-60