TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 971 of 1414

TM 9-2320-365-34-2 Change 2 19-4.1(19-4.2 Blank) (13.1) Position two spacer (20.1), washer (18) and screws (19) in seat mount (20). (14) Slide center seat (17) fully forward. (15) Fold center seat (17) down. (16) Apply sealing compound to threads of two screws (22). (17) Position two washers (21) and screws (22) in seat mount (20). (17.1) Position two spacers (20.1), washer (21) and screws (22) in seat mount (20). (18) Tighten two screws (16) to 71-89 lb-in. (8-10 N•m). (18.1) Tighten two screws (19 and 22) to 14-18 lb-ft (19- 25 N•m). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Perform step (17.1) on vehicles with cab S/N 12076G or higher. When tightening screws, flat sides of screws are to be in line with track sides. NOTE Perform step (13.1) on vehicles with cab S/N 12076G or higher. Cab S/N located on B Pillar.