Sign up to sell your inventory with NSN Lookup

TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 970 of 1414

TM 9-2320-365-34-2 19-2. INITIAL MACHINE GUN RING KIT INSTALLATION/REMOVAL (CONT) (10) Position top platform (8) in cab floor (9) with two washers (15) and screws (16) in clinch nuts (14). WARNING Adhesive Sealant MIL-S-46163 can damage your eyes. Wear safety goggles when using; avoid contact with eyes. If sealant contacts eyes, flush eyes with water and get immediate medical attention. Failure to comply may result in injury to personnel. NOTE Install center seat in folded and raised position with seat rails in forward position. (11) Apply sealing compound to threads of two screws (19). (12) Position center seat (17) on top platform (8). NOTE Flat sides of screw will be in line with seat tracks. (13) Position two washers (18) and screws (19) in seat mount (20). (14) Slide center seat (17) fully forward. (15) Fold center seat (17) down. 19-4 Change 1