TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 940 of 1414
TM 9-2320-365-34-2 18-32 Change 2 18-4. DIGITIZATION KIT INITIAL INSTALLATION (CONT) (28) Enlarge five holes at location (18) to 17/32” (13 mm). (29) Enlarge five holes in plastic cab liner (5) at locations (18) to 1/2” (13 mm). (30) Apply primer and paint to rear cab wall holes at locations (18). (31) Apply primer and paint to five rivnuts (6). (32) Install five rivnuts (6) in rear cab wall (2) at locations (18). (33) Position LH roof template (19) on cab roof (8) with two clamps. (34) Drill three 3/16” (5 mm) pilot holes at locations (20). (35) Remove two clamps and LH roof template (19) from cab roof (8). CAUTION Enlarge holes only in plastic wall covering, pull plastic away from rear cab wall if necessary. Failure to comply may result in damage to equipment. NOTE Use primer and paint as indicated in TM Paint TB43-0242.