TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 93 of 1414
TM 9-2320-365-34-2 (87) Remove self-locking nut (107), washer (108), and insulator washer (109) from alternator (5). (88) Route terminal lug TL6 (94) through boot on TL2 (96). CAUTION Insulator washer must be installed with flat side up. Failure to comply may result in damage to equipment. (89) Position 24v terminal lugs TL2 (96) and TL6 (94) on alternator (5) with insulator washer (109), washer (108), and self-locking nut (107). (90) Tighten self-locking nut (107) to 40 lb-in. (5 N·m). (91) Position boot on terminal lugs TL6 (94) and TL2 (96). CAUTION Insulator washer must be installed with flat side up. Failure to comply may result in damage to equipment. (92) Remove self-locking nut (110), washer (111), and insulator washer (112) from alternator (5). (93) Position 12v terminal lug TL60 (95) on alternator (5) with insulator washer (112), washer (111), and self-locking nut (110). (94) Tighten self-locking nut (110) to 40 lb-in. (5 N·m). (95) Position boot on terminal lug TL60 (95). Change 1 3-47