TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 916 of 1414
TM 9-2320-365-34-2 18-2. M1078/M1079 PINTLE HOOK EXTENSION KIT INITIAL INSTALLATION (CONT) WARNING Pintle hook extension weighs approximately 90 lbs (41 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. NOTE • Step (34) requires the aid of two assistants. • Use bolts P/N 12414307-142 and self-locking nuts P/N 12414308-025 on step (34). (34) Position pintle hook extension (37) on rear crossmember (9) with four bolts (54) and self-locking nuts (55). NOTE • Use bolts P/N 12414307-143 and self-locking nuts P/N 12414308-025 on step (35). • Steps (35) through (40) require the aid of an assistant. (35) Position two bolts (38) and self-locking nuts (39) in pintle hook extension (37). (36) Tighten four self-locking nuts (55) and two self-locking nuts (39) to 196-240 lb-ft (265-325 N·m). NOTE Use bolts P/N 12414307-141 and self-locking nuts P/N 12414308-025 on step (37). (37) Position two bolts (56) and self-locking nuts (57) in rear lower crossmember support (41). (38) Tighten two self-locking nuts (43 and 57) to 196-240 lb-ft (265-325 N·m). (39) Tighten six self-locking nuts (51) to 76-94 lb-ft (103-125 N·m). (40) Tighten two bolts (47 and 48) to 236-288 lb-ft (319-389 N·m). 18-8 Change 1