TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 913 of 1414
TM 9-2320-365-34-2 (14) Disconnect connector (27) from connector P56 (28). (15) Remove nut (29), lockwasher (30), and terminal lug TL31 (31) from base (26). (16) Disconnect connector (32) from connector P54 (33). (17) Remove nut (34), lockwasher (35), and terminal lug TL30 (36) from base (26). NOTE • Use bolts P/N 12414307-143 and self-locking nuts P/N 12414308-025 on step (18). • Step (18) requires the aid of an assistant. (18) Install pintle hook extension (37) on rear crossmember (9) with two bolts (38) and self-locking nuts (39). (19) Match mark four top holes (40) on rear crossmember (9). (20) Remove two self-locking nuts (39), bolts (38), and pintle hook extension (37) from rear crossmember (9). (21) Drill four 0.375 in. (9.5 mm) pilot holes in rear crossmember (9) at matchmarks. (22) Drill four 0.75 in. (19 mm) holes in rear crossmember (9). Change 1 18-5