TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 911 of 1414

TM 9-2320-365-34-2 (3) Remove cotter pin (5) from nut (6). Discard cotter pin. (4) Remove nut (6) and washer (7) from pintle hook (8). WARNING Pintle hook weighs approximately 65 lbs (30 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Steps (5) through (9) require the aid of an assistant. (5) Remove pintle hook (8) from rear crossmember (9). (6) Remove four self-locking nuts (10), bolts (11), and support (12) from rear crossmember (9). Discard self- locking nuts. CAUTION When removing bolts, continuous removal of collars is mandatory. Failure to comply will result in seizing of collar to bolt. NOTE Left and right side bolts and collars are removed the same way. Right side shown. (7) Remove two collars (13) and bolts (14) from RH frame rail (15). Discard collars and bolts. (8) Perform step (7) on left side bolts and collars. Change 1 18-3