TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 902 of 1414

TM 9-2320-365-34-2 17-2. SUSPENSION CYLINDER REPLACEMENT This task covers: a. Removal b. Installation c. Follow-On Maintenance INITIAL SETUP Equipment Conditions Engine shut down (TM 9-2320-365-10). Cab raised (TM 9-2320-365-10). Top radiator fan shroud removed (TM 9-2320-365-20- 3). (LH side only). Engine front resilient mounts removed (para 3-4). (LH side only). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Goggles, Industrial (Item 25, Appendix B) Gloves, Rubber (Item 23, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Wrench, Torque, 0-600 lb-ft (Item 85, Appendix B) Wrench, Torque, 0-200 lb-in. (Item 81, Appendix B) Tools and Special Tools (Cont) Socket Set, Socket Wrench (Item 34, Appendix B) Wrench Set, Socket (Item 74, Appendix B) Materials/Parts Cap and Plug Set (Item 18, Appendix C) Packing, Preformed (2) (Item 212, Appendix F) Nut, Self-Locking (Item 145, Appendix F) Pin, Cotter (Item 226.1, Appendix F) Hydraulic Fluid A (Item 41.2, Appendix C) Personnel Required (2) a. Removal. NOTE Left and right suspension cylinders are removed the same way. Right side shown. (1) Remove two quick release pins (1) from suspension cylinder (2). (2) Remove screw (3) and two lanyards (4) from suspension cylinder (2). 17-2 Change 1