TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 898 of 1414
TM 9-2320-365-34-2 16-40.4 Change 2 16-6. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT) (12.1) Tighten four screws (15). (12.2) Tighten four screws (15) to 26-35 lb-ft (35-47 N•m). (12.3) Fold tabs on four screws (15). (13) Install preformed packing (16) on fitting (17). (14) Install fitting (17) on transmission oil cooler (18). (14.1) Install preformed packing (18.1) on fitting (17). NOTE • Perform steps (13) through (14.9) on vehicles equipped with transmission oil cooler tubes. • Perform steps (13) and (14) on vehicles not previously equipped with corrosive enhanced fittings. NOTE • Perform the following step on kits equipped with shearhead screws. • Alternately tighten screws. • When correct torque is reached, bearing cup small screw hex head will break off. NOTE Perform the following two steps on bearing cups equipped with tabs.