TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 891 of 1414
TM 9-2320-365-34-2 (14) Install oil seal (16) in valve body (14). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (15) Install washer (17) and retaining ring (18) in valve body (14). CAUTION Ensure oil ports on valve body and housing are aligned. Failure to comply may result in damage to equipment. (16) Install gasket (19) and valve body (14) on housing (2). (17) Position three screws (20) in valve body (14). (18) Tighten three screws (20) to 16-20 lb-ft (22-27 N m). (19) Install back-up ring (21) and retaining ring (22) on output shaft (23). (20) Position output shaft (23) in vise. (21) Install inner clutch gear (24) on output shaft (23). 16-37