Covering the politics, Business and technology of defense - Subscribe Today

TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 887 of 1414

TM 9-2320-365-34-2 (11) Verify wire (10) is not bent or broken. d. Assembly. NOTE Apply lubricating oil to all parts during assembly. (1) Install needle bearing (1) in housing (2). NOTE Perform steps (1.1) through (1.4) on PTO Assembly (P/N 12378814-001). (1.1) Install two bearings (3) in input gear (4). (1.2) Install two thrust washers (5) and input gear (4) in housing (2). (1.3) Install preformed packing (6) on idler shaft (7). CAUTION Ensure flat side of shaft is lined up to make proper contact. Failure to comply may result in damage to equipment. (1.4) Install idler shaft (7) in housing (2). Change 1 16-35