TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 880 of 1414
TM 9-2320-365-34-2 16-6. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT) WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (5) Remove retaining ring (7) from bearing cap (2). (6) Remove output shaft (8) from bearing cap (2). (7) Remove retaining ring (9) and bearing (10) from bearing cap (2). (8) Remove spacer (11) from output shaft (8). (9) Remove retaining ring (12) from output shaft (8). (10) Remove clutch back-up cylinder (13), vee ring (14), and piston (15) from output shaft (8). NOTE Perform step (11) on PTO Assembly (P/N 276XMF-JX-D5XK). (11) Remove key (16) from output shaft (8). (12) Remove spring (17) from output shaft (8). (13) Remove two preformed packings (18) from output shaft (8). Discard preformed packings. (14) Remove seven clutch plates (19) and eight friction plates (20) from output shaft (8). 16-30 Change 1