TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 878 of 1414
TM 9-2320-365-34-2 16-28.2 Change 2 16-6. POWER TAKE-OFF (PTO) REPLACEMENT/REPAIR (CONT) (6) Lift tabs from two bearing cups (9). (6.1) Remove four screws (10) and two bearing cups (9) from yoke (11). Discard screws. (7) Slide drive shaft (12) from side to side and separate universal joint (13) from yoke (11). (8) Attach drive shaft (12) to frame (14). (9) Remove 90-degree fitting (5) from transmission (15). (10) Remove preformed packing (16) from fitting (5). Discard preformed packing. (11) Remove eight screws (17), PTO (3), and gasket (18) from transmission (15). Discard gasket. (12) Remove 90-degree fitting (19) from PTO (3). (13) Remove preformed packing (20) from fitting (19). Discard preformed packing. (14) Remove four threaded studs (21) from PTO (3). NOTE Step (8) requires the aid of an assistant. NOTE Step (11) requires the aid of an assistant. NOTE Perform steps (12) and (13) on PTO Assembly (P/N 276XMF-JX-D5XK). NOTE There are two types of bearing cups those with tabs and those without. Perform the following step on bearing ups with tabs.