TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download

Page 876 of 1414

TM 9-2320-365-34-2 16-6. POWER TAKEOFF (PTO) REPLACEMENT/REPAIR (CONT) CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (2) Disconnect oil hose (4) from PTO (3). (3) Remove oil hose (4) from 90-degree fitting (5). NOTE Perform steps (4) through (5.6) on vehicles equipped with transmission oil cooler tubes. (4) Disconnect transmission oil cooler return tube (6) from 90-degree fitting (7). NOTE • Vehicles equipped with either non-corrosive enhanced fittings with one preformed packing or corrosive enhanced fittings with two preformed packings. When removing a non-corrosive enhanced fitting replace it with corrosive enhanced fitting. • Perform step (5) on vehicles equipped with corrosive enhanced fittings. (5) Remove preformed packing (8) from 90-degree fitting (7). Discard preformed packing. 16-28 Change 1