TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 873 of 1414
TM 9-2320-365-34-2 (3) Remove fitting (3) and 90 degree fitting (4) from hydraulic rotary pump (8). (4) Remove preformed packings (9 and 10) from fitting (3) and 90 degree fitting (4). b. Installation. (1) Install preformed packings (1 and 2) on fittings (3) and 90 degree fitting (4). (2) Install fitting (3) and 90 degree fitting (4) in hydraulic rotary pump (5). NOTE Step (3) requires the aid of an assistant. (3) Position hydraulic rotary pump (5) on PTO (6) with two washers (7) and screws (8). (4) Tighten two screws (8) to 58-78 lb-ft (79-105 N m). (5) Connect hydraulic hoses (9 and 10) to fitting (3) and 90 degree fitting (4). 16-25