TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 872 of 1414
TM 9-2320-365-34-2 16-5. HYDRAULIC ROTARY PUMP REPLACEMENT This task covers: a. Removal b. Installation c. Follow-on Maintenance INITIAL SETUP Equipment Conditions Splash guard removed (TM 9-2320-365-20-4). Air cleaner removed (TM 9-2320-365-20-3) Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Wrench, Torque, 0-175 lb-ft (Item 80, Appendix B) Goggles, Industrial (Item 25, Appendix B) Materials/Parts Cap and Plug Set (Item 18 Appendix C) Packing, Preformed (Item 211, Appendix F) Packing, Preformed (Item 209, Appendix F) Dispenser, Pressure Sensitive Adhesive Tape (Item 31, Appendix C) Personnel Required (2) WARNING Wear appropriate eye protection when working under vehicle due to the possibility of falling debris. Failure to comply may result in injury to personnel. a. Removal. CAUTION Cap or plug hydraulic hoses and fittings to prevent contamination of hydraulic system. Failure to comply may result in damage to equipment. NOTE Tag hydraulic hoses and connection points prior to disconnecting. (1) Disconnect hydraulic hoses (1 and 2) from fitting (3) and 90 degree fitting (4). NOTE Step (2) requires the aid of an assistant. (2) Remove two screws (5), washers (6), and hydraulic rotary pump (7) from PTO (8). 16-24