TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 87 of 1414
TM 9-2320-365-34-2 WARNING Adhesives, solvents, and sealing compounds can burn easily, can give off harmful vapors, and are harmful to skin and clothing. Keep away from open fire and use in a well- ventilated area. If adhesive, solvent, or sealing compound gets on skin or clothing, wash immediately with soap and water. Failure to comply may result in injury to personnel. (51) Apply sealing compound to threads of two bolts (61). (52) Position upper exhaust pipe (60) on right rear mounting bracket (46) with two bolts (61). (53) Position upper exhaust pipe (60) and clamp (62) on turbocharger (63) with self-locking nut (64). (54) Tighten self-locking nut (64) to 89-109 lb-in. (10-12 N·m). (55) Tighten two bolts (45 and 61) to 129-159 lb-ft (175-215 N·m). (56) Position upper exhaust pipe (60) and clamp (65) on lower exhaust pipe (66) with self-locking nut (67). (57) Tighten self-locking nut (67) to 89-109 lb-in. (10-12 N·m). NOTE Steps (57.1) and (57.2) require the aid of an assistant. (57.1) Position lower front support crossmember (67.1) on vehicle with four bolts (67.2) and self-locking nuts (67.3). (57.2) Tighten four self-locking nuts (67.3) to 295-369 lb-ft (400- 500 N·m). Change 1 3-43