TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 865 of 1414
TM 9-2320-365-34-2 (35) Install two preformed packings (51) and back-up rings (52) on brake piston (53). (36) Alternately install 10 friction disc plates (54) and nine brake drive plates (55) in outer brake housing (56). (37) Install brake piston (53) in outer brake housing (56). (38) Install brake shaft (57) in outer brake housing (56). (39) Install two dowel pins (58) in motor end support (34). (40) Install preformed packing (59) on motor end support (34). (41) Position outer brake housing (56) in motor end support (34) with six lockwashers (60) and screws (61). (42) Tighten six screws (61) to 45-55 lb-ft (61-75 N·m). e. Installation. WARNING 11K Self-recovery winch (SRW) weighs approximately 130 lbs (59 kgs). Attach a suitable lifting device prior to installation. Failure to comply may result in injury to personnel or damage to equipment. (1) Position 11K SRW (1) on vehicle with eight bolts (2), plates (3 and 4), and self-locking nuts (5). (2) Tighten eight self-locking nuts (2) to 150-180 lb-ft (203- 244 N·m). 16-17