TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 860 of 1414
TM 9-2320-365-34-2 16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR (CONT) d. Assembly. NOTE Apply lubricating oil to parts during assembly. (1) Install two bushings (1) in cable guide sheaves (2). (2) Install two cable guide sheaves (2) and roller shafts (3) on base mounts (4) with spring pins (5). WARNING Use care when installing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (3) Install secondary sun gear (6) in primary carrier assembly (7) with two retaining rings (8). (4) Install ball bearing (9) and shaft seal (10) in gear end flange (11). (5) Install preformed packing (12) on gear end flange (11). (6) Position gear end flange (11) on ring gear (13) with 20 lockwashers (14) and screws (15). (7) Tighten 20 screws (15) to 38-45 lb-ft (52-61 N·m). 16-12