TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 855 of 1414
TM 9-2320-365-34-2 (29) Remove eight screws (48), lockwashers (49), and gear end support (43) from two base mounts (19). Discard lockwashers. (30) Remove preformed packing (50) from gear end support (43). Discard preformed packing. (31) Remove 20 screws (51), lockwashers (52), and gear end flange (42) from ring gear (34). Discard lockwashers. (32) Remove preformed packing (53) from gear end flange (42). Discard preformed packing. (33) Remove shaft seal (54) and ball bearing (55) from gear end flange (42). Discard shaft seal. WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (34) Remove two retaining rings (56) and secondary sun gear (57) from primary carrier assembly (40). 16-7