TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 852 of 1414
TM 9-2320-365-34-2 16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR (CONT) (12) Remove eight bolts (17), lockwashers (18), and motor end support (4) from two base mounts (19). Discard lockwashers. (13) Remove primary sun gear (20) from motor end flange (21). WARNING Use care when removing retaining rings. Retaining rings are under tension and can act as projectiles when released. Failure to comply may result in injury to personnel. (14) Remove retaining ring (22) and ball bearing (23) from primary sun gear (20). (15) Remove locator pin (24), compression spring (25), and shifter round knob (26) from arm shifter (15). Discard compression spring. (16) Remove spring pin (27) and arm shifter (15) from shouldered shaft (28). Discard spring pin. (17) Remove two preformed packings (29) from shouldered shaft (28). Discard preformed packings. 16-4