TM-9-2320-365-34-2 LMTV Direct Maintenance Manual M1078 Series - Volume 2 Download
Page 850 of 1414
TM 9-2320-365-34-2 Section II. MAINTENANCE PROCEDURES 16-2. 11K SELF-RECOVERY WINCH (SRW) ASSEMBLY REPLACEMENT/REPAIR This task covers: a. Removal b. Disassembly c. Cleaning/Inspection d. Assembly e. Installation f. Follow-On Maintenance INITIAL SETUP Equipment Conditions 11K Self-recovery winch (SRW) cable removed (TM 9-2320-365-20-4). Muffler and heat shields removed (TM 9-2320-365- 20-3). 11K Self-recovery winch (SRW) cartridge/ counterbalance valve removed (para 16-3). 11K Self-recovery winch (SRW) hydraulic motor removed (para 16-4). Cargo bed removed (para 15-8). Tools and Special Tools Tool Kit, Genl Mech (Item 68, Appendix B) Pan, Drain (Item 36, Appendix B) Wrench, Torque, 0-250 N·m (Item 82, Appendix B) Gloves, Rubber (Item 23, Appendix B) Goggles, Industrial (Item 25, Appendix B) Tools and Special Tools (Cont) Sling, Cargo (2) (Item 48, Appendix B) Materials/Parts Rag, Wiping (Item 59, Appendix C) Oil, Lubricating (Item 44, Appendix C) Solvent, Dry Cleaning (Item 81, Appendix C) Nut, Self-locking (8) (Item 134, Appendix F) Lockwasher (12) (Item 93, Appendix F) Parts Kit, Seal (Item 221, Appendix F) Parts Kit, Disc and Spring (Item 219, Appendix F) Parts Kit, Winch (Item 224, Appendix F) Spring, Compression (Item 289, Appendix F) Lockwasher (40) (Item 92, Appendix F) Pin, Spring (4) (Item 231, Appendix F) Lockwasher (6) (Item 91, Appendix F) Personnel Required (2) a. Removal. WARNING 11K Self-recovery winch (SRW) weighs approximately 130 lbs (59 kgs). Attach a suitable lifting device prior to removal. Failure to comply may result in injury to personnel or damage to equipment. NOTE Step (1) requires the aid of an assistant. Remove eight self-locking nuts (1), bolts (2), mounting plates (3 and 4), and 11K SRW (5) from vehicle. Discard self-locking nuts. 16-2